Float switch alternative for Dirty Water. Designed to be fitted to a submersible pump.

Typical uses include pumps designed for:

• Flood prevention sumps
• Small waste water tanks
• Narrow wells
• Irregular shaped tanks
• Tanks, sumps or wells with pipes or other obstructions inside

Advantages

Ideal for pumps deployed in small foul water sumps.

Benefits

• Provides automatic operation in tight places where a float switch cannot be relied upon
• Directly controls pumps up to 8A
• Suitable for sewage and trash water
• Operation angle of +/- 20° from vertical

The post Waste Water Level Sensor – Agma W EVO appeared first on Mac 3 UK.

Mac3 Sensopress is a programmable, DIN rail mounted level controller and is ideal for integration with OEM and panel built products.

Sensopress measures the level of liquid in a tank or reservoir using a high accurate pressure sensor which detects the weight of fluid above it. Pumps and valves can be controlled to fill, empty or maintain levels by Sensopress based on the reading of a single sensor with no mechanical movement.

Sensopress avoids the need for technicians to accurately set floats or sensors at various heights within the tank in order to operate pumps and valves at the right levels. All levels and functions can be precisely set from the control panel.

Sensopress can function with any liquid using a probe and can be manually calibrated to accept probes of different ranges.

Sensopress is available in single channel and multi-channel models. The single channel model is supplied with a single output for controlling one external appliance, whereas the multi-channel is supplied with 4 outputs.

Each output channel operates independently and may overlap in range.

Advantages

The supplied level sensor is suitable for clean water and liquid food products. However, Sensopress can function with any liquid using either an alternative probe and can be manually calibrated to accept probes of different ranges.

Benefits

• DIN rail mounted.
• Ideal for OEM systems and panel building.
• Measures level by pressure sensing
• Change all level settings from the control panel
• Available with 1 or 4 outputs
• Suitable for use in clean water or liquid food products

The post DIN Rail Mounted Level Controller – Sensopress appeared first on Mac 3 UK.

DIN rail mounted (3DIN, 54mm) conductivity probe level controller. Available for various supply voltages from 12 to 415V AC and DC.

Mac3 Electroprobe Q is a multifunctional level controller with 1 fixed function. The Differential Fill/Drain Function, activates a relay output to maintain the level between two probes set at different heights. The relay only changes state when either the upper probe becomes immersed or the lower probe becomes dry, allowing the water level to move between but not exceed the area between the two level probes.

3 conductivity probes are used, a common electrode is always immersed and 2 electrodes above this level form low and high set points allowing Electroprobe Q to maintain a the level within a specific range.

Electroprobe Q is commonly used with water and other fluids with dependable conductivity, there are 3 main models available:

• NS – Normal Sensitivity – For clean water and fluids with a maximum total resistance of 5.6KΩ. This unit will tolerate very long probe cable lengths of up to 1000m
• AS – High Sensitivity – For fluids with low conductivity, particularly rainwater, with total resistance of 68KΩ.
• SR – Adjustable Sensitivity – For fluids of unknown resistance. Adjustable between 0 and 100KΩ.

Advantages

• Some models are multi-voltage.
• Emptying or Filling functions.
• No accessible controls which avoid unauthorised adjustment.

Benefits

• Ideal for OEM integration or control panel building
• Uses conductivity probes with no moving parts
• Fill or drain between 2 probes points
• Suitable for a variety of conductive liquids
• From 12V to 415V
• 3 probe sensitivity ranges including adjustable sensitivity (SR models)
• Non-voltage relay outputs rated 250VAC 5A(AC1) 2A(AC3)

The post DIN Rail Mounted Level Controller – Sensitivity Options – Electroprobe Q appeared first on Mac 3 UK.

DIN rail mounted (2DIN, 35mm) conductivity probe level controller. Available for various supply voltages from 12 to 415Vac.

Electroprobe Z is a multifunctional level controller with 1 fixed function. The Differential Fill/Drain Function, activates a relay output to maintain the level between two probes set at different heights. The relay only changes state when either the upper probe becomes immersed or the lower probe becomes dry, allowing the water level to move between but not exceed the area between the two level probes.

3 conductivity probes are used, a common electrode is always immersed and 2 electrodes above this level form low and high set points allowing Electroprobe Z to maintain a the level within a specific range.

Electroprobe Z is commonly used with water and other fluids with dependable conductivity, there are 3 main models available.

• NS – Standard Sensitivity – For clean water and fluids with a maximum total resistance of 5.6KΩ. This unit will tolerate very long probe cable lengths of up to 1000m
• AS – High Sensitivity – For fluids with low conductivity, particularly rainwater, with total resistance of 68KΩ.resistance of 68KΩ. This Model will tolerate probe cable lengths of up to 80m
• SR – Adjustable Sensitivity – For fluids of unknown resistance. Adjustable between 0 and 100KΩ.This Model will tolerate probe cable lengths of up to 70m

Advantages

• All models are multi-voltage.
• Single or Double Voltage Supply (Z8 or Z11 models)
• Models available with Octal or Undecal DIN Sockets, can be changed in seconds

Benefits

• Ideal for OEM integration or control panel building
• Uses conductivity probes with no moving parts
• Fill or drain between 2 levels
• Suitable for a variety of conductive liquids
• 12V to 415V Supply
• 3 probe sensitivity ranges including Adjustable probe sensitivity (SR models)
• Non-voltage relay outputs rated 250VAC 5A(AC1) 2A(AC3)

The post DIN Rail Mounted Level Controller – Electroprobe Z appeared first on Mac 3 UK.

DIN rail mounted (4DIN, 76mm) conductivity probe level controller with adjustable sensitivity and time delay. Available for various supply voltages from 12 to 415V AC and DC.

Mac3 Electroprobe EV is a family of DIN rail mounted level controllers. Electroprobe EV operates between 2 level probes set at different levels within the tank, plus a common probe (always immersed). The output relay is activated when water touches the upper probe, and de-activated when the lower probe becomes dry. Below both these probes a common probe provides a constant sensing connection back to the controller.

The following features are available in various models of Electroprobe EV:

• Differential Fill/Drain function – Activates a relay output to maintain the level between 2 probes set at different heights.
• Adjustable Sensitivity up to 100Kohm, suitable for water of low conductivity such as rainwater.

Advantages

• All models are multi-voltage.
• Time Delay of 0-16 seconds available on some models.
• Emptying or Filling functions.

Benefits

• Ideal for OEM integration or control panel building
• Uses conductivity probes with no moving parts
• Fill or drain between 2 probes points
• 24, 117, 230 and 380-415VAC Supply
• Adjustable probe sensitivity (0-100KΩ)
• Single or Double pole non-voltage relay outputs
• Non-voltage relay outputs rated 250VAC 5A(AC1) 2A(AC3)

The post DIN Rail Mounted Level Controller with Adjustable Sensitivity and Time Delay – Electroprobe EV appeared first on Mac 3 UK.

DIN rail mounted (4DIN, 76mm) conductivity probe level controller with external alarm relay. Available for various supply voltages from 24Vac, 117Vac and 230Vac.

Mac3 Electroprobe DB is a multifunctional level controller with 4 functions:

• Differential Fill/Drain Function, activates a relay output to maintain the level between two probes set at different heights. The relay only changes state when either the upper probe becomes immersed or the lower probe becomes dry, allowing the water level to move between but not exceed the area between the two level probes.
• High Level Alarm – Activates the alarm relay when a probe is immersed.
• Low Level Alarm – Activates the alarm relay when a probe becomes dry.
• Single Point Control – Switches a 2nd control relay when a probe is immersed or dry. This can be used to inhibit/enable the device attached to the differential relay, or to enable an additional device.

Advantages

All functions can operate at the same time using up to 7 probes and are independent of each other in operation.

Benefits

• Ideal for OEM integration or control panel building
• Uses conductivity probes with no moving parts
• Adjustable probe sensitivity (0-20KΩ)
• External alarm relay
• Non-voltage relay outputs rated 250VAC 5A(AC1) 2A(AC3)

The post DIN Rail Mounted Level Controller with Alarms – Electroprobe DB appeared first on Mac 3 UK.

DIN rail-mounted unit, that measures a rainwater tank level using a submerged pressure sensor (not included) and either tops up with a measured amount of mains water (direct systems with submerged pump), or opens a 3-way motorized valve (indoor break tank & pump systems) when required.

When a low-level threshold is reached, RainControl opens a solenoid or motorised valve to supply mains water until a high-level threshold is reached. After this, RainControl de-activates the output and reverts to level display mode.

Advantages

An anti-blocking timer function allows the valve to be scheduled to open periodically regardless of the tank level, to prevent jamming.

All of the thresholds for high and low water levels can be set by the installer, calibrating the unit to whatever installation the unit is connected to.

Benefits

• DIN rail mounted.
• Ideal for OEM systems and panel building.
• Customisable operating parameters.
• Accurate LCD level display and mains cold water top-up/back-up function.
• Level measurement by submerged pressure sensor (not included).
• No moving parts.

FAQs

Read more about the RainControl Tank Level Controller on our RainController FAQ page.

The post DIN Rail Mounted Rainwater Level Controller – RainControl appeared first on Mac 3 UK.

Float switch alternative for Dirty Water. Designed to be fitted to a submersible pump.

Typical uses include pumps designed for:

• Flood prevention sumps
• Small waste water tanks
• Narrow wells
• Irregular shaped tanks
• Tanks, sumps or wells with pipes or other obstructions inside

Advantages

Ideal for pumps deployed in small foul water sumps.

Benefits

• Provides automatic operation in tight places where a float switch cannot be relied upon
• Directly controls pumps up to 8A
• Suitable for sewage and trash water

The post Waste Water Level Sensor – Agma W appeared first on Mac 3 UK.

Monitoring the level of liquid in a tank. Suitable for any monitoring any conductive liquid as long as that does not damage the sensing wires (not included), for example rainwater, grey water, ground water, flood water.

Advantages

Compact and Simple to use. Powered by a 9v battery so there is no need to run cables, reducing both the complexity and cost of installation.

Benefits

Comes with bracket to easily mount the MacNivel, making installation and use of the meter simple and accessible. Convenient one button operation, reading a tank level within seconds and displaying the result on a simple to read LED light bar.

The post Level Monitor – Battery Powered- MacNivel appeared first on Mac 3 UK.

Float switch alternative for tight spaces. Designed to be fitted to a submersible pump.

Typical uses include pumps designed for:

• Flood prevention sumps
• Small water tanks
• Narrow wells
• Irregular shaped tanks
• Tanks, sumps or wells with pipes or other obstructions inside

Advantages

Ideal for pumps deployed in small sumps or flood drainage crates.

Benefits

• Provides automatic operation in tight places where a float switch cannot be relied upon
• Directly controls pumps up to 8A
• Suitable for clean water with a very low solid content

The post Clean Water Level Sensor – Agma 22 appeared first on Mac 3 UK.