0 ItemsSubtotal: £0.00 Go to Shop
Clean Water Level Sensor – Agma 22
Mac3 Agma22 is a compact float switch alternative, designed to be fitted vertically to a submersible pump. When used for pump control, Agma22 activates a connected pump when the water levels are high enough for pump use, and deactivates the pump when the water level has decreased to the set minimum.
Agma22 is designed to be used with clean water or water with a very low solid content. Not suitable for slurry or foul water applications (use the AgmaW instead). Avoid using in water containing iron or other ferrous materials as these may affect operation.
Buy 10 or more to get a 15.04% discount at checkout.
Float switch alternative for tight spaces. Designed to be fitted to a submersible pump.
Typical uses include pumps designed for:
- Flood prevention sumps
- Small water tanks
- Narrow wells
- Irregular shaped tanks
- Tanks, sumps or wells with pipes or other obstructions inside
Ideal for pumps deployed in small sumps or flood drainage crates.
- Provides automatic operation in tight places where a float switch cannot be relied upon
- Directly controls pumps up to 8A
- Suitable for clean water with a very low solid content
|Dimensions||37 × 100 × 227 mm|
Non – Toxic Polypropylene
20(8)A 250V~ Single phase
|Maximum Operating Pressure|
|Operating Range (Level)|
-10°C to +60°C
0 to +50°C
2 Wire 25cm, 3 Wire 25cm, 2 core H07RNF 10M, 3 core H07RNF 10M, 3 core PVC A05VVF 10M