For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

Pump control for pressure boosting by pressure and flow detection. The pump starts by pressure/flow sensing and the pump is stopped by flow sensing. When either water flow or a pressure drop is detected, the E-Control engages the pump to maintain pressure in the system until it detects that the flow has stopped when it disengages the pump.

Clean water only.

Advantages

Simple on-pipe installation with easy to read LED panel.

The E-Control features dry run protection with a warning light on the control panel to show if there is a system error. Also featured is a ‘Anti-lock’ feature. This anti-lock feature prevents a pump from pump from becoming blocked by starting the pump once every 24 hours, preventing small amounts of sediment from settling inside the pump and causing it to fail, and rotating the shaft ensuring adequate lubrication of the seals.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting
• Monitors flow and pressure
• Pump anti-lock/anti-blocking cycle

The post Home Boosting – Electronic Pump Pressure Controller – E-Control appeared first on Mac 3 UK.

For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

Pump control for pressure boosting by flow detection. When a flow is detected in the pipe, E-Flow runs the pump to increase pressure in the system until it detects that the flow has stopped. E-Flow can control a single phase pump of up to 2 Hp (1.5kW).

Clean water only.

Advantages

Simple on-pipe installation with easy to read LED panel.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting

The post Home Boosting – Electronic Flow Switch – E-Flow appeared first on Mac 3 UK.

Pump pressure with built in dry run protection. Controls single phase clean water pumps up to 2Hp (1.5kW).

This model uses pressure and flow sensing to decide when to run the pump.

Advantages

Simple on-pipe installation with easy to use large dial to adjust the restart pressure.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting

The post Electronic Water Pump Pressure Switch – SuperSimplex E appeared first on Mac 3 UK.

Pump pressure switch for use with a float switch for dry run protection. Controls single phase clean water pumps up to 2Hp (1.5kW).

Advantages

Simple on-pipe installation with easy to use large dial to adjust the restart pressure.

Benefits

• 1″ (25mm) BSP in-line fitting
• Vertical or horizontal Mounting

The post Electromechanical Pump Controller – SuperSimplex M appeared first on Mac 3 UK.

Irrigation Input Expansion module for the Mac3 HydroController (advanced version). Expands the number of inputs from 4 to 16. Enabling 4 different pump pressures to be used by up to 16 irrigation zones.

Advantages

Supports inputs from up to 16 solenoid valves in 4 channels. When connected between a HydroController and an irrigation controller, the 4 irrigation channels, when activated, will each select a pressure preset by the operator, allowing the pressure of the pump system to be varied to suit the zone currently being irrigated.

Benefits

• DIN rail mounted
• Designed for use with the HydroController (advanced version)
• For use in irrigation systems
• Used to supply specific pressures to 4 irrigation zones.
• 24VAC inputs.

The post Irrigation Input Expansion – Multipress appeared first on Mac 3 UK.

Designed for residential systems, the E-Power is ideal for Booster Pump Sets. Available in two variations, E-Power Std, and E-Power Adv.

E-Power Std can control a single pump with variable speed, while a secondary pump can also be activated in an on/off only mode to supplement the main pump as needed.

E-Power Adv controls one directly connected pump, and up to seven additional pumps all at variable speed through the use of multiple slaved E-Power Adv controllers. Slave units communicate with one another using CANbus protocol, a serial communications standard which is highly immune to environmental interference.

E-Power Adv can also use Multimaster mode. This allows connected E-Power Adv units to be promoted to the role of ‘master’ as needed, ensuring continued operation in the event of any single controller failure.

Advantages

E-Power is constructed around a stainless steel pipe and pressure sensor without non-return valve or any other flow obstruction resulting in increased system efficiency and superior reliability due to excellent self-cooling characteristics.

Benefits

• Varies pump speed to match demand.
• Energy Saving.
• Programmable restart pressure.
• Simple in-line fitting.
• Water-cooled.
• Vertical or horizontal mounting.
• Can be linked with other e-power units (e-power advance only).

The post Compact Water-cooled Inverter – E-Power appeared first on Mac 3 UK.

Variable speed inverters designed for controlling water pumps in a variety of applications:

• single (std) or multiple pump systems (Adv)
• air cooled (Wall mounted) or water cooled (in-line pipe mounted)
• versions for:
  • single phase power for a single phase pump,
  • single phase power for three phase pump, and
  • three phase power for three phase pump

Advantages

Easy to install with a user-friendly interface to set the programmable operating parameters.

Benefits

• Varies speed to match demand
• Models available to control single or three phase pumps up to 11kW
• Energy saving
• Air cooled wall mounted design or Water Cooled in-line pump design
• Vertical or horizontal mounting
• Built-in pump protection (dry-run, undr/over voltage, low system pressure, output over voltage)
• Can be linked with 8 other pumps with HydroController units via integrated CanBus interface (Adv version only)
• Automatically assigns another “Master” Controller if original fails (Adv version only)

The post Programmable Pump Inverters – HydroController appeared first on Mac 3 UK.

Variable speed inverter designed for use in swimming pool installations.

Advantages

Easy to install. Wifi connection with 7 day timer (advanced version only).

Benefits

• Models available to control single and/or three phase pumps up to 11kW
• Energy saving
• Air cooled wall mounted design
• Programmable operating parameters
• Built-in pump protection (dry-run, under/over voltage, low system pressure, output over voltage)

The post Pump Inverter – Swimming Pool Pumps – HydroController Pool appeared first on Mac 3 UK.

Ideal for remote agricultural and borehole uses powered by solar energy.

Advantages

Varies the pump speed to match demand or available solar energy. Easy to install with a use-friendly interface

Benefits

• No battery storage required.
• Models available to control three phase pumps up to 11kW
• Input voltage 250-800VDC
• Air cooled wall mounted design
• Programmable operating parameters
• Built-in pump protection (dry-run, undr/over voltage, low system pressure, output over voltage)

The post Pump Inverter – Off-Grid Solar – HydroController Solar appeared first on Mac 3 UK.

Application

For residential pressure boosting systems. Replaces traditional pressure boosting systems that use a pressure switch and a pressure vessel (expansion tank). Option for built in CosPhi Dry Run Protection. Alternatively both models can be used with a Float Switch after adjusting the housing.

Advantages

Designed to be mounted directly on to the pipe work. The innovative built-in pressure sensor ensures flow is not obstructed through the unit.

Benefits

On pipe mounting reduces the need for mounting surfaces and running pipes to a controller. As the PresSystem does not obstruct the pipe in any way, losses usually associated with pressure measurement do not arise.

The post Pump Pressure Switch – Adjustable Pressure – PresSystem appeared first on Mac 3 UK.