0 ItemsSubtotal: £0.00 Go to Shop
Home Boosting – Electronic Pump Pressure Controller – E-Control
For home (domestic) header tank boosting or in-line boosting of low mains water pressure.
Pump control for pressure boosting by pressure and flow detection. The pump starts by pressure/flow sensing and the pump is stopped by flow sensing. When either water flow or a pressure drop is detected, the E-Control engages the pump to maintain pressure in the system until it detects that the flow has stopped when it disengages the pump.
Clean water only.
Simple on-pipe installation with easy to read LED panel.
The E-Control features dry run protection with a warning light on the control panel to show if there is a system error. Also featured is a ‘Anti-lock’ feature. This anti-lock feature prevents a pump from pump from becoming blocked by starting the pump once every 24 hours, preventing small amounts of sediment from settling inside the pump and causing it to fail, and rotating the shaft ensuring adequate lubrication of the seals.
- 1″ (25mm) BSP in-line fitting
- Built-in dry-run protection
- Vertical or horizontal Mounting
- Monitors flow and pressure
- Pump anti-lock/anti-blocking cycle
|Dimensions||220 × 200 × 120 mm|
In-line 1" (25mm) BSP male
1.5 – 8 bar
0.8 – 2 bar
|Min Differential Pressure|
0 to +50°C
+1 to +40°C
Clean Water – No Solids – pH 5-9
220Vac-240Vac 50-60Hz Single Phase, 130Vac 50-60Hz Single Phase
1.5kW (2Hp), 745W (1HP)
|Dry Run Protection|