Compact Water-cooled Inverter – E-Power

 

Designed for residential systems, the E-Power is ideal for Booster Pump Sets. Available in two variations, E-Power Std, and E-Power Adv.

E-Power is constructed around a stainless steel pipe and pressure sensor without non-return valve or any other flow obstruction resulting in increased system efficiency and superior reliability due to excellent self-cooling characteristics.

Buy 10 or more to get a 10% discount at checkout.

SKU: VEPR***. Categories: , , .

Description

Application

Designed for residential systems, the E-Power is ideal for Booster Pump Sets. Available in two variations, E-Power Std, and E-Power Adv.

E-Power Std can control a single pump with variable speed, while a secondary pump can also be activated in an on/off only mode to supplement the main pump as needed.

E-Power Adv controls one directly connected pump, and up to seven additional pumps all at variable speed through the use of multiple slaved E-Power Adv controllers. Slave units communicate with one another using CANbus protocol, a serial communications standard which is highly immune to environmental interference.

E-Power Adv can also use Multimaster mode. This allows connected E-Power Adv units to be promoted to the role of ‘master’ as needed, ensuring continued operation in the event of any single controller failure.

Advantages

E-Power is constructed around a stainless steel pipe and pressure sensor without non-return valve or any other flow obstruction resulting in increased system efficiency and superior reliability due to excellent self-cooling characteristics.

Benefits

  • Varies pump speed to match demand.
  • Energy Saving.
  • Programmable restart pressure.
  • Simple in-line fitting.
  • Water-cooled.
  • Vertical or horizontal mounting.
  • Can be linked with other e-power units (e-power advance only).

Additional information

Weight2 kg
Dimensions150 × 200 × 330 mm
Supply Voltage

230Vac (170 -270 Vac) Single Phase

Max Pump Power

1.5Hp (8A), 3Hp (10A)

Output Voltage

Single phase 230Vac (8A) -1.5kw (1.5hp), 3-Phase 230Vac (10A) -2.2kw (3hp)

Communication

Standard on/off, Advanced CANbus

Mounting

In Line (vertical or Horizontal)

Ingress protection

IP65

Operating Temperature

4°C – 40°C

Operating Pressure Range

0.3 – 8 bar

Maximum Over pressure

12 bar

Fluid Temperature

1°C – 50°C

Fluid Type

Clean Water – No Solids – pH 5 – 9

Display

2 Digit Alphanumeric LED

Pressure Set Point

0.3 – 8 bar

Protection

Dry Running, Low/High Power Supply, Short-circuit, Over-current, Thermal Overload,
Insufficient Pressure, Water Hammer, Pressure Sensor Malfunction

Output Frequency

5 – 100 Hz

Acceleration Time

1.5 – 5 Seconds

Electrical Safety

EN60335

Electromagnetic Compatibility

EN61000 (Specific Norms In CE Certificate)

Multiple Pumps

STD version – 2 (1 variable speed, 1 fixed speed), ADV version – 8 (up to 7 slaved inverters)