Home Boosting – Electronic Flow Switch – E-Flow

 

Pump control for pressure boosting by flow detection.

For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

If you need to adjust the pressure get the E-control version.

SKU: VEF***. Categories: , .

Description

Application

For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

Pump control for pressure boosting by flow detection. When a flow is detected in the pipe, E-Flow runs the pump to increase pressure in the system until it detects that the flow has stopped. E-Flow can control a single phase pump of up to 2 Hp (1.5kW).

Clean water only.

Advantages

Simple on-pipe installation with easy to read LED panel.

Benefits

  • 1″ (25mm) BSP in-line fitting
  • Built-in dry-run protection
  • Vertical or horizontal Mounting

Additional information

Weight.85 kg
Dimensions120 × 100 × 200 mm
Material (Body)

Calcium filled polypropylene / ABS

Mounting

In-line 1" (25mm) BSP male

Working Pressure

1.5 -8 bar

Maximum Overpressure

12 bar

Minimum Flow

1l/min

Maximum Flow

100l/min

Operating Temperature

-10 to +50°C, 0 to +50°C

Liquid Temperature

+1 to +40°C

Liquid Type

Clean Water – No Solids – pH 5-9

IP Rating

IP65

Supply Voltage

220Vac-240Vac 50-60Hz Single Phase, 130Vac 50-60Hz Single Phase

Pump Power

1.5kW (2Hp), 745W (1HP)

Pump Current

25(8)A

Contact Rating / Output Characteristics

AC2500 VA Resistive Load CosPhi=1
AC1875 VA Resistive Load CosPhi=0.4

Number of Operations

30 Operations/Minute Max

You may also like…