Water pump pressure switch with built-in dry run protection. A warning light on the control panel indicates if there is a fault.
Controls single-phase clean water pumps up to 2Hp (1.5kW).
This model uses pressure and flow sensing to decide when to run the pump.
Pump pressure with built in dry run protection. Controls single phase clean water pumps up to 2Hp (1.5kW).
This model uses pressure and flow sensing to decide when to run the pump.
Simple on-pipe installation with easy to use large dial to adjust the restart pressure.
| Weight | .9 kg |
|---|---|
| Dimensions | 250 × 155 × 450 mm |
| Material (Body) | Calcium filled polypropylene / ABS |
| Mounting | In-line 1" (25mm) BSP male inlet, female outlet |
| Working Pressure | 1.5 -8 bar |
| Maximum Overpressure | 12 bar |
| Restart Pressure | 0.8 – 2 bar |
| Minimum Differential Pressure | 1.5 bar |
| Maximum Flow | 100l/min |
| Operating Temperature | 0 to +50°C |
| Liquid Type | Clean Water |
| IP Rating | IP54 |
| Supply Voltage | 230Vac 50Hz Single Phase |
| Supply Voltage to Pump | 1 x 230Vac 50Hz Single Phase |
| Pump Power | 1.5kW (2Hp) |
| Pump Current | 25(8)A |