For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

Pump control for pressure boosting by pressure and flow detection. The pump starts by pressure/flow sensing and the pump is stopped by flow sensing. When either water flow or a pressure drop is detected, the E-Control engages the pump to maintain pressure in the system until it detects that the flow has stopped when it disengages the pump.

Clean water only.

Advantages

Simple on-pipe installation with easy to read LED panel.

The E-Control features dry run protection with a warning light on the control panel to show if there is a system error. Also featured is a ‘Anti-lock’ feature. This anti-lock feature prevents a pump from pump from becoming blocked by starting the pump once every 24 hours, preventing small amounts of sediment from settling inside the pump and causing it to fail, and rotating the shaft ensuring adequate lubrication of the seals.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting
• Monitors flow and pressure
• Pump anti-lock/anti-blocking cycle

The post Home Boosting – Electronic Pump Pressure Controller – E-Control appeared first on Mac 3 UK.

For home (domestic) header tank boosting or in-line boosting of low mains water pressure.

Pump control for pressure boosting by flow detection. When a flow is detected in the pipe, E-Flow runs the pump to increase pressure in the system until it detects that the flow has stopped. E-Flow can control a single phase pump of up to 2 Hp (1.5kW).

Clean water only.

Advantages

Simple on-pipe installation with easy to read LED panel.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting

The post Home Boosting – Electronic Flow Switch – E-Flow appeared first on Mac 3 UK.

Pump pressure with built in dry run protection. Controls single phase clean water pumps up to 2Hp (1.5kW).

This model uses pressure and flow sensing to decide when to run the pump.

Advantages

Simple on-pipe installation with easy to use large dial to adjust the restart pressure.

Benefits

• 1″ (25mm) BSP in-line fitting
• Built-in dry-run protection
• Vertical or horizontal Mounting

The post Electronic Water Pump Pressure Switch – SuperSimplex E appeared first on Mac 3 UK.

Pump pressure switch for use with a float switch for dry run protection. Controls single phase clean water pumps up to 2Hp (1.5kW).

Advantages

Simple on-pipe installation with easy to use large dial to adjust the restart pressure.

Benefits

• 1″ (25mm) BSP in-line fitting
• Vertical or horizontal Mounting

The post Electromechanical Pump Controller – SuperSimplex M appeared first on Mac 3 UK.

Application

For residential pressure boosting systems. Replaces traditional pressure boosting systems that use a pressure switch and a pressure vessel (expansion tank). Option for built in CosPhi Dry Run Protection. Alternatively both models can be used with a Float Switch after adjusting the housing.

Advantages

Designed to be mounted directly on to the pipe work. The innovative built-in pressure sensor ensures flow is not obstructed through the unit.

Benefits

On pipe mounting reduces the need for mounting surfaces and running pipes to a controller. As the PresSystem does not obstruct the pipe in any way, losses usually associated with pressure measurement do not arise.

The post Pump Pressure Switch – Adjustable Pressure – PresSystem appeared first on Mac 3 UK.