Irrigation Input Expansion module for the Mac3 HydroController (advanced version). Expands the number of inputs from 4 to 16. Enabling 4 different pump pressures to be used by up to 16 irrigation zones.

Advantages

Supports inputs from up to 16 solenoid valves in 4 channels. When connected between a HydroController and an irrigation controller, the 4 irrigation channels, when activated, will each select a pressure preset by the operator, allowing the pressure of the pump system to be varied to suit the zone currently being irrigated.

Benefits

• DIN rail mounted
• Designed for use with the HydroController (advanced version)
• For use in irrigation systems
• Used to supply specific pressures to 4 irrigation zones.
• 24VAC inputs.

The post Irrigation Input Expansion – Multipress appeared first on Mac 3 UK.

Designed for residential systems, the E-Power is ideal for Booster Pump Sets. Available in two variations, E-Power Std, and E-Power Adv.

E-Power Std can control a single pump with variable speed, while a secondary pump can also be activated in an on/off only mode to supplement the main pump as needed.

E-Power Adv controls one directly connected pump, and up to seven additional pumps all at variable speed through the use of multiple slaved E-Power Adv controllers. Slave units communicate with one another using CANbus protocol, a serial communications standard which is highly immune to environmental interference.

E-Power Adv can also use Multimaster mode. This allows connected E-Power Adv units to be promoted to the role of ‘master’ as needed, ensuring continued operation in the event of any single controller failure.

Advantages

E-Power is constructed around a stainless steel pipe and pressure sensor without non-return valve or any other flow obstruction resulting in increased system efficiency and superior reliability due to excellent self-cooling characteristics.

Benefits

• Varies pump speed to match demand.
• Energy Saving.
• Programmable restart pressure.
• Simple in-line fitting.
• Water-cooled.
• Vertical or horizontal mounting.
• Can be linked with other e-power units (e-power advance only).

The post Compact Water-cooled Inverter – E-Power appeared first on Mac 3 UK.

Variable speed inverters designed for controlling water pumps in a variety of applications:

• single (std) or multiple pump systems (Adv)
• air cooled (Wall mounted) or water cooled (in-line pipe mounted)
• versions for:
  • single phase power for a single phase pump,
  • single phase power for three phase pump, and
  • three phase power for three phase pump

Advantages

Easy to install with a user-friendly interface to set the programmable operating parameters.

Benefits

• Varies speed to match demand
• Models available to control single or three phase pumps up to 11kW
• Energy saving
• Air cooled wall mounted design or Water Cooled in-line pump design
• Vertical or horizontal mounting
• Built-in pump protection (dry-run, undr/over voltage, low system pressure, output over voltage)
• Can be linked with 8 other pumps with HydroController units via integrated CanBus interface (Adv version only)
• Automatically assigns another “Master” Controller if original fails (Adv version only)

The post Programmable Pump Inverters – HydroController appeared first on Mac 3 UK.

Variable speed inverter designed for use in swimming pool installations.

Advantages

Easy to install. Wifi connection with 7 day timer (advanced version only).

Benefits

• Models available to control single and/or three phase pumps up to 11kW
• Energy saving
• Air cooled wall mounted design
• Programmable operating parameters
• Built-in pump protection (dry-run, under/over voltage, low system pressure, output over voltage)

The post Pump Inverter – Swimming Pool Pumps – HydroController Pool appeared first on Mac 3 UK.

Ideal for remote agricultural and borehole uses powered by solar energy.

Advantages

Varies the pump speed to match demand or available solar energy. Easy to install with a use-friendly interface

Benefits

• No battery storage required.
• Models available to control three phase pumps up to 11kW
• Input voltage 250-800VDC
• Air cooled wall mounted design
• Programmable operating parameters
• Built-in pump protection (dry-run, undr/over voltage, low system pressure, output over voltage)

The post Pump Inverter – Off-Grid Solar – HydroController Solar appeared first on Mac 3 UK.